ExPleat PFH Series

  • Summary
  • Features & Benefits
  • Applications
  • Specifications
  • Ordering Guide
  • Datasheet

ExPleat PFH Series are designed to meet the special needs of the electronics and high-purity chemical industries. Polytetrafluoroethylene (PTFE) membrane is resistant to virtually all chemicals. Because of the hydrophobic nature of PTFE, it can also be used to filter process gases. To minimize extractables, each cartridge module is pre-flushed with 18+ Megohm-cm DIW.
ExPleat PFH Series
  • Available in removal ratings from 0.05 µm 10 µm
  • Excellent chemical resistance
  • Hydrophobic PTFE that is pre-flushed to provide low TOC provides fast rinse up time with low TOC values
  • Available in pre rinse and Silicone free pre-flush versions
  • Manufactured in clean room environment and suitable for use in specialty chemicals, F&B, semiconductor and HDD process applications
  • Complies with FDA and EU requirements for plastics that are in contact with food
  • Filtration of strong acids, alkalis and solvents used in wet etching, solvent stripping and cleaning applications in electronics industry
  • Filtration of compressed air, pressurized gases and use as a general vent filter

ExPleat  PFH Cartridge Filter Specifications

Construction

Filter Membrane

PTFE membrane

Inner/Outer Cage & Support Layers

Polypropylene

Micron Ratings

0.05, 0.1, 0.2, 0.45, 1, 3 & 10 micron

 

Operating Conditions

Maximum Operating Temperature

90oC

Maximum Differential Pressure

20 psid @ 80oC

 

80 psid @ 20oC

Recommended Change-out Differential Pressure

35 psid

 

Cartridge Dimensions

Inner Diameter

28mm

Outer Diameter

69mm

Length

251mm - 1016mm

 

ExPleatPFHSeries

PFH

00A

10

0

T

Cartridge

Removal Rating

Length

End Configuration

Gasket

PFH: Hydrophobic  PTFE

00A - 0.05 um

09 - 9.87"

A: Double Open End with Gasket

E: EPDM

 

001 - 0.10 um

10 - 10"

B: 222 & Flat Cap

N: Buna N

 

002 - 0.20 um

19 - 19.5"

C: 222 with Spear

S: Silicone

 

004 - 0.45 um

20 - 20"

D: 226 & Flat Cap

V: Viton

 

010 – 1.00 um

29 - 29.25"

E: 226 with Spear

T: PFA encapsulated Viton

 

030 – 3.00 um

30 - 30"

 

 

 

100 – 10.0 um

40 - 40"

 

 

Our Products